How to Measure
Before starting your project it’s important to measure correctly so you know how much product you’ll need and avoid making mistakes.
Here are some handy guides showing you how to measure.
Don’t forget – measure twice, cut once!
How to Measure
Before starting your project it’s important to measure correctly so you know how much product you’ll need and avoid making mistakes. Here are some handy guides showing you how to measure.
Don’t forget – measure twice, cut once!
How to measure guides:
Dining Table
Kitchen Floor
Fridge Freezer
Kitchen Doors
Kitchen Drawers
Splashbacks
Worktops
Dining Table
INSTRUCTIONS
Measure the length and width of the table adding the required overhang as marked on the diagram.
= Required overhang
ROLL SIZE
Roll Width: 90cm
A typical dining table will require a 90cm x 2.1m roll.
Kitchen Floor
INSTRUCTIONS
Measure the length and width of the floor area.
PACK SIZE
d-c-fix® branded floor tiles contain 11 tiles which cover 1 square metre.
Example: A floor size of 2 x 4m (as pictured) would require 8sqm – 8 packs (88 tiles).
Floor Pops branded floor tiles contain 10 tiles which cover 0.93sqm, so 9 packs would be required to cover the same area.
Score and snap to cut tiles down to size.
Fridge Freezer
INSTRUCTIONS
Measure the height and width of each door (and sides if required), adding the required overhang as marked on the diagram.
= Required overhang
ROLL SIZE
Roll width: 67.5cm
A typical fridge freezer will require 67.5cm x 6m to cover front and sides.
Kitchen Doors
INSTRUCTIONS
Measure the height and width of each door, adding the required overhang as marked on the diagram.
= Required overhang
ROLL SIZE
Roll width: 67.5cm
A 5m length will typically cover 6 doors.
Kitchen Drawers
INSTRUCTIONS
Measure the height and width of each drawer, adding the required overhang as marked on the diagram.
= Required overhang
ROLL SIZE
Roll width: 67.5cm
A 1m length will typically cover 5 drawers.
Splashbacks
INSTRUCTIONS
Measure the height and width of each of the area you wish to cover. 3D Tile Wallpaper is applied horizontally.
ROLL SIZE
Roll width: 67.5cm
Example: A splashback size of 1.8 x 60cm (as pictured) would require 1 roll of 67.5cm x 2m.
Worktops
INSTRUCTIONS
Measure the height and width of your worktop, adding the required overhang as marked on the diagram.
= Required overhang
ROLL SIZE
Roll width: 67.5cm
Example: A worktop size of 60cm x 1.5m (as pictured) would require 1 roll of 67.5cm x 2m.
Walls
INSTRUCTIONS
Measure the height of the wall, add at least another 2cm top and bottom and cut the first strip.
= Required overhang
ROLL SIZE
Roll width: 52.07cm x 5.49m
Measure width of the room to find out how many drops are needed.
Example: The average UK ceiling height is 2.4m. So you should get 2 drops from one 5.49m roll (depending on pattern match).